Our main production is rotary cut dry birch veneer.
Thickness: 0.9 mm to 3 mm
Basic sizes:
- 1600x1600 mm
- 1300x1300 mm
Possible sizes:
- 1600x1300 mm
- 1600x3200 mm
- 1300x1600 mm
- 1300x2600 mm
It is possible to cut into size according to the customer requirements.
We sell MIX grade veneer, namely all veneer after peeling and drying. Sorting according to client's requirements is possible.
Typical ratio of veneer grades in 1 m3 :
Grade I: 0.5-1.50%
Grade II: 2.00-3.00%
Grade III: 20.00%
Grade IV: 26.00%
The inner layers are 50.00% , including pieces 5-8%.
The ratio can vary, depending on the quality of the birch logs.
Packing: packs wrapped in stretch film, strapped with PP tape, on pallets made of wood or plywood.
The rate of truck loading is 33,753 m3, the gross weight is 21500 kg
The container loading rate is 43.349 m3, gross weight up to 26500 kg.
Veneer grades:
Grade I
- practically free from defects; partially intergrown-, dead- and loose knots, knot holes, worm holes with diameteres not exceeding 6 mm and totaling 3 pcs. per 1 m2; also are allowed not more than 5 intergrown sound knots with a diameter of 15 mm per 1 m2, and some minor brown vein lines.
Grade II
– are allowed partially intergrown-, dead- and loose knots, knot holes, worm holes with diameteres not exceeding 6 mm and totaling 6 pcs. per 1 m2; also are allowed not more than 10 intergrown sound knots with a diameter of 25 mm per 1 m2, patching of the sheet surface is permitted. Knots and open defects are sealed with veneer inserts.
Grade III
- are allowed partially intergrown-, dead- and loose knots, knot holes, worm holes with diameteres not exceeding 6 mm and totaling 10 pcs. per 1 m2 of the sheet surface; intergrown sound knots are permitted in unlimited numbers.
Grade IV
– any manufacturing defects are allowed. Partially intergrown-, dead- and loose knots, knot holes, worm holes with diameteres not exceeding 40 mm are permissible in unlimited numbers, only fair glueing of veneer sheets is guaranteed.